Loading...

Risers – Fractions

Learn fractions. Discover a new way to learn fractions with our educational riser stickers designed especially for curious young minds. Thanks to their colorful illustrations, our stickers turn any riser into a dynamic learning zone.

CM02
Riser-fraction

Risers – Fractions

    In order to carry out your project, here are the steps to follow:

    1. Print this template.
    2. When creating, it is important to consider the number of risers in each of the flights of stairs. Thus, the creative will be adapted to the number of steps at each level.
    3. Then measure the width and height of each step. Note that while the width is generally the same at each riser, the height may differ from one step to another, as our schools were built several years ago.
    4. Allow yourself some leeway when measuring. It is wise to remove 1 cm on the width and on the height so as not to be too tight during installation.
    5. Enter in the table the dimensions of each of the steps, starting from the bottom of the table to the top, in order to maintain the order of the steps.
    6. Indicate in the Code column the model of the desired riser, according to our models available online.(EX : CM01-A)
    7. Indicate in the Precision column information such as the desired color, the desired slogan, or the value of the school to display.
    8. When requesting a quote, send us your scanned document to the address info@www.corridoractif.com.
    9. We will contact you shortly to validate the information.

    To determine the price of your project, consult the table below. Our prices vary according to the quantity of risers ordered, as well as the width of them, either smaller or larger than 52 inches.

    Directly glued Price per unit Price per installed unit

    Small - Less than 52 inches.

    Between 15 and 24 units 34$ each. 49$ each.
    Between 25 and 39 units 29$ each. 44$ each.
    Between 40 and 59 units 24$ each. 39$ each.
    More than 60 units 19$ each. 34$ each.

    Medium - Between 52 and 75 inches wide

    Between 15 and 24 units 39$ each. 54$ each.
    Between 25 and 39 units 34$ each. 49$ each.
    Between 40 and 59 units 29$ each. 44$ each.
    More than 60 units 24$ each. 39$ each.

    Large - over 75 inches wide

    Between 15 and 24 units 44$ each. 59$ each.
    Between 25 and 39 units 39$ each. 54$ each.
    Between 40 and 59 units 34$ each. 49$ each.
    More than 60 units 29$ each. 44$ each.
    OPTION - on styrene support - Add $10 per riser

    This option corresponds to a piece of unbreakable plastic on which the vinyl is pre-affixed. A double-sided tape with strong adhesion is glued on the back to facilitate installation.

    We use this option when the risers are damaged by rust, or on a ceramic surface.

    What product should be used

    Send us pictures of your stairs, it will help us choose the right product.


    Vinyl glued directly to the riser for surfaces of: terrazzo, painted metal, plastic.


    Vinyl glued on styrene support for surfaces of: ceramic, damaged metal.


    Ask for a quote

    Shopping cart

    close