Representation of the number

Learn representation of the number. Discover a new way to learn representation of the number with our educational stair risers stickers designed especially for curious young minds. Thanks to their colorful illustrations, our stickers turn any riser into a dynamic learning zone.

CM04
riser numbers presentation

Representation of the number

    In order to carry out your project, here are the steps to follow:

    1. Print thistemplate.
    2. When creating the template, take into account the number of risers per flight of stairs in order to adapt the visual to each landing.
    3. Measure the width and height of each riser. The width is generally uniform, but the height may vary, especially in older buildings.
    4. Allow for some leeway: subtract 1 cm from the width and height to make installation easier.
    5. Enter the dimensions in the table from bottom to top to follow the order of the steps.
    6. Indicate the desired riser model in the Code column (e.g., CM01-A).
    7. Use the Specification column to indicate the color, slogan, or school value to be displayed.
    8. When requesting a quote, send the scanned document to info@www.corridoractif.com.

    We will contact you shortly to validate the information and finalize the project.

    To determine the price of your project, consult the table below. Our prices vary according to the quantity of risers ordered, as well as the width of them, either smaller or larger than 52 inches.

    Directly glued Price per unit Price per installed unit

    Small - Less than 52 inches.

    Between 15 and 24 units 34$ each. 49$ each.
    Between 25 and 39 units 29$ each. 44$ each.
    Between 40 and 59 units 24$ each. 39$ each.
    More than 60 units 19$ each. 34$ each.

    Medium - Between 52 and 75 inches wide

    Between 15 and 24 units 39$ each. 54$ each.
    Between 25 and 39 units 34$ each. 49$ each.
    Between 40 and 59 units 29$ each. 44$ each.
    More than 60 units 24$ each. 39$ each.

    Large - over 75 inches wide

    Between 15 and 24 units 44$ each. 59$ each.
    Between 25 and 39 units 39$ each. 54$ each.
    Between 40 and 59 units 34$ each. 49$ each.
    More than 60 units 29$ each. 44$ each.
    OPTION - on styrene support - Add $10 per riser

    This option corresponds to a piece of unbreakable plastic on which the vinyl is pre-affixed. A double-sided tape with strong adhesion is glued on the back to facilitate installation.

    We use this option when the risers are damaged by rust, or on a ceramic surface.

    What product should be used

    Send us pictures of your stairs, it will help us choose the right product.


    Vinyl glued directly to the riser for surfaces of: terrazzo, painted metal, plastic.


    Vinyl glued on styrene support for surfaces of: ceramic, damaged metal.


    Ask for a quote

    Shopping cart

    close